Assessment Validation 101: Guide to Validating Assessments
Assessment Validation 101: Guide to Validating Assessments
Blog Article
RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.
The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.
The standards specify that two types of validation need to be performed.
The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.
The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.
This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.
What are the Two Types of Assessment Validation?
Exploring the Concept of Assessment Validation
As discussed earlier and in our prior blogs, validation involves two parts: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
Our focus in this article will be on assessment tool validation.
Procedure for Assessment Tool Validation
Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.
Ideal Times to Conduct Assessment Tool Validation
The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
This implies that any time you get new learning resources, assessment tool validation must be done before they are used by students.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:
- resources get updated
- your scope includes new training products
- review your course against training product updates
- identifying your learning resources as a risk during your risk assessment
The risk-based regulatory approach of ASQA requires RTOs to perform regular risk assessments. Student complaints about learning resources indicate it's time for assessment tool validation.
Choosing Training Products for Validation
It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.
Starting Assessment Tool Validation: What You Need
Study Resources
Since you are validating your assessment tools, you will require the entire suite of your learning resources:
Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.
Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Team for Validation
Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.
Your validation panel, as a group, must possess:
Vocational competencies and current industry skills relevant to the unit being validated
Current expertise and skills in vocational teaching and learning
Either of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the next version
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?
As detailed in our blog post Common Problems In Assessment Tools, it is crucial that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Principles of Assessment
Fairness – Does the assessment process ensure equal opportunity and access for everyone?
Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?
Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Basic Rules of Evidence
Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool confirm that the work get more info is the candidate’s own?
Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?
Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To avoid employing learning resources that leave unit requirements unmet, be sure to adhere to these guidelines:
Lead by Example
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
change nappies
prepare bottles, bottle feed infants, and clean equipment
solid food preparation and feeding babies
appropriately respond to infant signs and cues
prepare and settle babies for sleep
monitor and foster age-appropriate physical exploration and gross motor skills
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
All or Not Competent
Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
Possible answers may include:
Obligatory resources
Pertinent costs
Time span of activities
Appointed roles and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental concern in the workplace and select the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – elimination, isolation, engineering controls
People – isolation, engineering controls, administration
Structural hazards – substituting, isolation, use of engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolation, engineering, administration
Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.
Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.